contact us
603E, 6/F, Hang Pont Commercial Building, 31 Tonkin Street, Cheung Sha Wan, Kowloon, HongKong
Operation Guide

User manual of Hikvision Production for New User

1TVI Camera +DVR(More TVI Camera and DVR can be find in

1.system connection

Connect TVI Camera and DVR with Coaxial Cable,then connect DVR and Player with VGA Cable or HDMI cable.


         Open the DVR and input new password to activate it.Please remember the password!


      3.Then you can see the image in the player.

2IPC+ NVR(More IPC and NVR can be find in

      1. system connection

      Connect IPC and NVR with network cable.Connect NVR and Player with VGA Cable or HDMI Cable.

      2.Download SADP

      Please download and install the software SADP from official website of Hikvision:

      Or you can download it from Dropbox we upload:

    3.Activate IPC and change its IP.

Open SADP,you can see the status of your device,such as below picture.Choose the device unactivated,the input your password to activated it.(Please remember your password to against that you can not access to your device.)

Then choose the device you have activated,like below picture,change the IP Address and Gate way,make network segment the same as your network.

Input the password you have set,then click Modify,and the device will work.

    4.Activate NVR and change its IP

     You can activate NVR and change its IP like IPC's operating.

    5.Plug and play

     Open the NVR,and find the Camera in the menu like below,choose the channel you want to make it Plug and play,click Edit.

Then you will see below picture,Click Adding Method,choose Plug-and-Play.And once you connect IPC and NVR with POE interface,

You will see the image immediately.

 For more Hikvision Production and Service,please enter the website: